Slatwall Panels

  • Slatwall is a great versatile display system which can be used in all types of retail environments
  • We stock slatwall panels in the 3 standard sizes
  • Landscape                    2400mm L x 1200mm H
  • Portrait                        1200mm L x  2400mm H
  • 4 X 4 board                  1200mm L x  1200mm H
  • All boards are 18mm Mdf with standard 100mm pitch grooves
  • Other size panels & pitch profiles are available , subject to quotation .
  • Melamine , Laminate & other Veneer panels available subject to quotation .
  • We stock Raw , Cream , Grey , White . Other colours and woodgrains available [ see below ] .
  • Choose from a large range of different colour finishes , with a wide range of complimentary  PVC coloured inserts    [sold seperately ], clip in or slide in to the slatwall grooves which provides the finishing touch . Now available are clip in Aluminium inserts . Also available are a wide range of shaped trims to tidy up any exposed edges .
  • Our range of colours & finishes for slatwall
  • We stock  Raw , Cream , Grey , White   
  • FROM £16 per board
  • Yellow , Red , Blue , Black , Blue , Pewter , Brushed Aliminium, Graphite, Rustic Oak , Pinot Grey , Pinot Beige , Pinot White , Light Walnut , Ash , Oak , Bavarian Beech , Cherry , Dark Ash , Jet Oak , Irish Maple , OSB Board , Mirror , Walnut
  • Please contact A.D.A for quotation .
 
Call 01244 281093
  • Our Slatwall panels
  • Made from UK sourced boards
  • Made from dense Deep-Router specification MDF with a melamine face
  • We supply & fit slatwall panels on a daily basis , we have asked our fitting teams for some quick and helpful tips
  • Slatwall is best fixed to vertical timber battens set @ 600mm centres , although this does take a little more time , the following slatwall panels are easier to install and gives a neater finish overall .
  • Slide most of the plastic / aluminium inserts into the slatwall panel , leaving out the top , bottom & 3 equally spaced . Screw through the slot with a suitable sized counter-sunk screw x 3 per length of panel . Place remaining plastic / aluminium inserts into panel to hide screws .
  • Always try to start at a high point in the room as floors are not always level , if you start at a low point every bottom board will need to be cut to keep the level .
  • Slatwall delivery information
  • Slatwall is a very difficult product to deliver , we prefer to deliver ourselves , diect to your door , rather than using a haulage company . We are more flexible on delivery times , and will deliver when it is convenient for you.
  • Please fill out contact form below or phone us for delivery quotation .

Slatwall delivery information

  • Palletised Haulage deliveries , minimum quantity of 4boards
  • Delivery charges - Minimum delivery charge is from £80for 2400mm x 1200mm panels , the exact delivery cost depends on delivery location and urgency of delivery , Please contact A.D.A for delivery quotation
  • You are responsible for unloading the goods
  • Drivers are not obliged to help with unloading , more than one pair of hands is recommended . Many drivers will assist and if specified a tail lift vehicle is used so that the pallet can be left for you to unload , in your own time . Deliveries will be between the hours of 0800 and 1730 hrs , sometimes using an articulated lorry , you must advise us of any restrictions on delivery times or restricted access . Failure to notify of any restrictions may result in failed delivery and re-delivery charges . If we are informed of any restrictions beforehand , we can usually find a way to deliver  that is satisfactory to both parties , for example we can arrange the driver phones 30mins in advance of delivery
  • Before 10 or noon deliveries are possible , but at extra cost.Please contact A.D.A for quotation

Contact Us

Share by: